PC Crashing

Juliet Ferguson 0 Reputation points
2026-11-17T20:20:05.0933333+00:00

Occasionally I'll be doing something simple on my PC, like a few moments ago I was watching a youtube video and both my monitors will go black and my main one will say something like "system ran into a problem/error" and then the stop code at the bottom says something about memory, I don't know exactly what it says because it leaves the screen pretty quickly, but a loud buzzing noise also plays through my headphones. I don't know much about computers and I'm unsure what to do.

Microsoft 365 and Office | Microsoft 365 Defender | For home | Windows
0 comments No comments

2 answers

Sort by: Newest
  1. Igor Leyko 112.6K Reputation points Independent Advisor
    2026-11-17T21:08:32.4+00:00

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-17T20:20:28.8833333+00:00

    A stop code that mentions memory, combined with black screens and buzzing audio, usually points to a serious Windows crash caused by hardware, a driver, or related software. The first useful detail is the exact stop code text, because Windows shows it at the bottom of the crash screen and it helps narrow down the cause.

    Try these steps in order:

    1. Note the exact stop code next time it appears Look for the text at the bottom of the screen, such as MEMORY_MANAGEMENT or PAGE_FAULT_IN_NONPAGED_AREA.
    2. Check Device Manager for driver problems
      • Right-click Start and select Device Manager.
      • Look for any device with an exclamation mark !.
      • Right-click that device and select Update driver.
      • If updating does not help, try Disable device or Uninstall device.
    3. Install the latest Windows updates Go to: Start > Settings > Update & Security > Windows Update > Check for Windows updates
    4. Make sure the drive has enough free space Windows needs free disk space for swap files and other functions. A good target is 10% to 15% free space.
    5. Run Windows Memory Diagnostics
      • Open Control Panel.
      • Search for Memory.
      • Select Diagnose your computer's memory problems.
      • After the test finishes, open Event Viewer and check the System log for MemoryDiagnostics-Results.
    6. Check Event Viewer for related errors
      • Open Event Viewer.
      • Check the System log.
      • Look for critical or error events that happened at the same time as the crash. This can help identify the device or driver involved.
    7. Start in Safe Mode if crashes keep happening Safe Mode loads only the minimum required drivers and services, which helps isolate whether a driver is causing the problem.
    8. If new hardware was added recently, remove it temporarily New hardware or incompatible hardware can trigger stop code errors.
    9. If the issue started after a recent driver or system change, roll back that change Recently added drivers or system services are a common cause of bug checks.

    If the crashes continue, configure Windows to save a memory dump so the crash can be analyzed:

    • Search for Advanced system settings and press Enter.
    • On the Advanced tab, under Startup and Recovery, select Settings.
    • Under Write debugging information, choose Automatic memory dump.
    • Select OK and restart the PC.
    • Dump files are typically saved in %SystemRoot%\MEMORY.DMP or %SystemRoot%\Minidump.

    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.