Printer issues

Phil Perham 20 Reputation points
2026-11-17T01:52:44.1433333+00:00

My new HP computer is down so I'm using my old Dell XPS with Windows 7, my computer will not print on my new Epson ET-3958, do you have a solution so that my new printer will work with my old computer, my computer says Epson ET3958 does not have drivers.

Windows for home | Previous Windows versions | Devices and drivers
0 comments No comments

Answer accepted by question author

AI answer

2026-11-17T01:53:33.31+00:00

Install the Epson ET-3958 on the Dell only if Epson lists a Windows 7 driver for that exact model and system type; if Epson does not provide one, the practical solution is to print from a supported newer computer rather than force an incompatible driver.

Check for the correct Epson driver

  1. On the Dell, select Start, right-click Computer, and select Properties.
  2. Note whether System type says 32-bit Operating System or 64-bit Operating System.
  3. Go to Epson’s official support website and search for the exact model ET-3958.
  4. In its Downloads/Drivers section, select Windows 7 32-bit or Windows 7 64-bit, matching the Dell.
  5. If Epson offers a matching package:
    • Open Start → Devices and Printers.
    • Right-click any incomplete ET-3958 entry and select Remove device.
    • Disconnect the printer’s USB cable, if connected.
    • Run Epson’s downloaded installer.
    • Connect the printer only when the installer requests it.
    • Restart the computer and print a Windows test page.

Downloading the model-specific package directly from the printer manufacturer is the recommended route when Windows cannot locate the driver.^1^

If Epson supplies a Windows 7 driver as files rather than an installer

Use this only when the Epson download contains a Windows 7-compatible .inf driver file:

  1. Open Start → Devices and Printers → Add a printer.
  2. Select Add a local printer.
  3. Choose the appropriate existing USB port, or create the network port specified by Epson.
  4. At the driver-selection screen, select Have Disk.
  5. Browse to the extracted Epson driver folder, select its .inf file, and finish installation.

Windows 7 supports selecting a downloaded driver through Update Driver → Browse my computer → Let me pick → Have Disk, but the file still must be intended for the device and Windows version.^2^

If Epson does not list Windows 7

Do not install a Windows 10/11 driver or an unrelated Epson model’s driver. The available Microsoft material does not document a supported generic Windows 7 driver for this specific Epson model. Printer manufacturers are responsible for providing model- and platform-compatible drivers.^3^

In that case, the workable choices are:

  • Repair and use the newer HP computer.
  • Use another supported Windows 10/11 computer.
  • Ask Epson Support whether the ET-3958 has a specifically supported Windows 7 package or another manufacturer-approved printing method.

Windows 7 support ended on January 14, 2020, and Microsoft no longer publishes normal updates or security updates for it.^4^ Keeping the Dell offline except when necessary would reduce exposure, but replacing or upgrading it is the safer long-term option.


References

  1. windows cannot find my printer which is attached by cable - Microsoft Q&A
  2. WacomKMDF Driver
  3. I have tried to donload my printer driver and get a message that says my computer is not compatible. - Microsoft Q&A
  4. Frequently asked questions about the Windows 7 end of support
AI-generated content may be incorrect. Read our transparency notes for more information.

Was this answer helpful?

1 person found this answer helpful.

0 additional answers

Sort by: Newest

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.