Install the Epson ET-3958 on the Dell only if Epson lists a Windows 7 driver for that exact model and system type; if Epson does not provide one, the practical solution is to print from a supported newer computer rather than force an incompatible driver.
Check for the correct Epson driver
- On the Dell, select Start, right-click Computer, and select Properties.
- Note whether System type says 32-bit Operating System or 64-bit Operating System.
- Go to Epson’s official support website and search for the exact model ET-3958.
- In its Downloads/Drivers section, select Windows 7 32-bit or Windows 7 64-bit, matching the Dell.
- If Epson offers a matching package:
- Open Start → Devices and Printers.
- Right-click any incomplete ET-3958 entry and select Remove device.
- Disconnect the printer’s USB cable, if connected.
- Run Epson’s downloaded installer.
- Connect the printer only when the installer requests it.
- Restart the computer and print a Windows test page.
Downloading the model-specific package directly from the printer manufacturer is the recommended route when Windows cannot locate the driver.^1^
If Epson supplies a Windows 7 driver as files rather than an installer
Use this only when the Epson download contains a Windows 7-compatible .inf driver file:
- Open Start → Devices and Printers → Add a printer.
- Select Add a local printer.
- Choose the appropriate existing USB port, or create the network port specified by Epson.
- At the driver-selection screen, select Have Disk.
- Browse to the extracted Epson driver folder, select its
.inffile, and finish installation.
Windows 7 supports selecting a downloaded driver through Update Driver → Browse my computer → Let me pick → Have Disk, but the file still must be intended for the device and Windows version.^2^
If Epson does not list Windows 7
Do not install a Windows 10/11 driver or an unrelated Epson model’s driver. The available Microsoft material does not document a supported generic Windows 7 driver for this specific Epson model. Printer manufacturers are responsible for providing model- and platform-compatible drivers.^3^
In that case, the workable choices are:
- Repair and use the newer HP computer.
- Use another supported Windows 10/11 computer.
- Ask Epson Support whether the ET-3958 has a specifically supported Windows 7 package or another manufacturer-approved printing method.
Windows 7 support ended on January 14, 2020, and Microsoft no longer publishes normal updates or security updates for it.^4^ Keeping the Dell offline except when necessary would reduce exposure, but replacing or upgrading it is the safer long-term option.
References