Apple AirPods Pro 3 earbuds requires multiple connection attempts to recognize microphone

Cris Williams 0 Reputation points
2026-11-13T16:07:20.1733333+00:00

Each morning I boot up and click to connect my APP3. Windows recognizes 'audio' only (output). I then disconnect, allow the APP3 to automatically connect to my iPhone, then click Connect again in Windows. On that second connect attempt, Windows recognizes both 'audio' (output) and 'mic' (input).

Is this a known issue? Is there a known fix?

  • Windows 11 Pro, fully patched including all driver updates
  • Have tried removal and re-pairing
Windows for business | Windows Client for IT Pros | Devices and deployment | Set up upgrades and drivers
0 comments No comments

2 answers

Sort by: Most helpful
  1. Chen Tran 13,550 Reputation points Independent Advisor
    2026-11-13T17:38:00.25+00:00

    Hello Cris Williams,

    Thank you for posting question on Microsoft Windows Forum!

    The plausible explanation to this behavior is that profile state machine mismatch during the initial Service Discovery Protocol (SDP) query and link establishment upon a cold boot. When Windows initializes the connection to the AirPods Pro 3 on startup, it successfully negotiates the A2DP (Advanced Audio Distribution Profile) sink for high-quality music/media output. However, the handshake or SDP attribute request for the HFP/HSP (Hands-Free Profile / Audio Gateway) service times out or fails to bind the eSCO (Synchronous Connection-Oriented) voice channel required for the microphone. Windows treats the device strictly as an output-only audio sink.

    When you disconnect and reconnect, the AirPods' internal firmware state machine and the Windows Bluetooth stack force a fresh SDP re-enumeration. On this second attempt, the Hands-Free profile successfully registers, exposing both the playback endpoint and the mic input.

    The suggestion here is to check "Hands-Free Telephony" service which can sometimes be disabled or fail to stick, preventing the microphone profile from loading. In the Devices and Printers console. Right-click your AirPods Pro 3 and select Properties. Go to the Services tab. Ensure Hands-Free Telephony is checked. If it is unchecked, enable it, click Apply, and reconnect the AirPods.

    Since Windows frequently puts Bluetooth host controllers into low-power states during boot or modern standby, causing radio state corruption when audio profiles try to initialize simultaneously. It is worth disabling Power Management on the Bluetooth Adapter by opening Device Manager. Expand Bluetooth, right-click your primary Bluetooth adapter, and select Properties. Navigate to the Power Management tab. Then uncheck "Allow the computer to turn off this device to save power". Also, making sure the Startup type of these services Windows Audio, Windows Audio Endpoint Builder, and Bluetooth Support Service are set to Automatic, and right-click -> Restart them if you notice audio subsystem hangups.

    Otherwise, you can consider to uninstall your physical Bluetooth adapter and then perform a clean Bluetooth adapter reinstall.

    If the provided information is helpful! It is appreciated to consider clicking "Accept Answer". Should you have more questions, feel free to leave a message. Have a nice working day!

    Was this answer helpful?


  2. AI answer

    2026-11-13T16:08:28.0466667+00:00

    Install the latest Bluetooth driver directly from the PC or Bluetooth-adapter manufacturer, because the first connection is failing to expose the microphone-capable Bluetooth profile even though ordinary audio connects.

    Windows 11 uses A2DP for output-only stereo audio and HFP (Hands-Free Profile) for microphone access. When HFP is available, Windows creates both output and input endpoints; an output endpoint alone indicates that the microphone profile was not initialized on that connection.^1^

    This exact first-connection/second-connection AirPods Pro 3 symptom has been publicly reported, but there is no formal Microsoft or Apple advisory identifying it as a confirmed product defect.^2^

    Install the OEM Bluetooth driver

    Being fully updated through Windows Update does not necessarily mean the PC manufacturer’s newest or most compatible Bluetooth package is installed.

    1. Open Device Manager → Bluetooth and note the adapter manufacturer and model, such as Intel, Realtek, Qualcomm, or MediaTek.
    2. Visit the PC manufacturer’s support site and locate the Bluetooth driver for the exact PC model and Windows 11 version.
    3. Install that package, even if Device Manager currently reports that the best driver is installed.
    4. Restart Windows.
    5. Connect the AirPods before allowing the iPhone to connect.
    6. Open Settings → System → Sound → Input. Select the AirPods and run Microphone test.

    Microsoft specifically recommends obtaining the driver from the PC manufacturer when Windows cannot find a newer one.^3^

    Verify whether HFP is missing

    Immediately after the first morning connection:

    1. Open Settings → System → Sound.
    2. Check Input → Choose a device for speaking or recording.
    3. If no AirPods input appears, HFP was not enumerated; microphone permissions are not the primary issue.
    4. If the AirPods input does appear, select it and run Microphone test.

    Also check the Bluetooth service exposed for the device:

    1. Open Control Panel → Devices and Printers.
    2. Right-click the AirPods and select Properties → Services.
    3. If Hands-Free Telephony is present but unchecked, enable it and reconnect.
    4. If it is missing entirely on the failed connection, proceed with driver recovery rather than another ordinary re-pair.

    Enabling Hands-Free Telephony resolved a closely matching Windows 11/AirPods case where the hands-free connection and microphone disappeared.^4^

    If the OEM driver does not resolve it

    Perform a clean Bluetooth-adapter reinstall:

    1. Download the OEM Bluetooth installer first so it is available locally.
    2. Open Device Manager → Bluetooth.
    3. Right-click the physical Bluetooth adapter—not individual Microsoft enumerators—and select Uninstall device → Uninstall.
    4. Shut down the PC rather than merely restarting it.
    5. Turn it back on. Windows should reinstall the adapter; otherwise use Device Manager → Action → Scan for hardware changes.
    6. Install the downloaded OEM package and restart.
    7. Test the first AirPods connection again.

    Uninstalling the adapter temporarily removes Bluetooth connectivity, so have a wired keyboard or mouse available if necessary. Microsoft documents adapter removal and automatic reinstallation as the recovery path when the Bluetooth stack remains present but malfunctions.^3^

    Only if the input appears but applications cannot use it

    Check Settings → Privacy & security → Microphone and enable:

    • Microphone access
    • Let apps access your microphone
    • Let desktop apps access your microphone

    Then select the AirPods under Settings → System → Sound → Input and test them.^5^

    If the microphone endpoint remains absent only on the first connection after OEM driver replacement and adapter recovery, the reconnect workaround remains the practical option. Escalate to the PC/Bluetooth-adapter manufacturer with the adapter model, OEM driver version, Windows build, and the observation that HFP appears only after the second connection.


    References

    1. Bluetooth Classic audio
    2. AirPods Pro 3 Microphone Not Working in W… - Apple Community
    3. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/fix-bluetooth-problems-in-windows#general-bluetooth-troubleshooting-in-windows-11)
    4. Airpods Hands Free bluetooth connection is no longer available - Microsoft Q&A
    5. Fix microphone problems | Microsoft Support
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.