SYSVOL replication failure

Hakim Fahadi 40 Reputation points
2026-10-23T14:29:16.8066667+00:00

Failure to synchronize Group Policy files and scripts stored in the SYSVOL folder across domain controllers.

Windows for business | Windows Server | Directory services | Deploy group policy objects
0 comments No comments

2 answers

Sort by: Most helpful
  1. Xuan Nhu 1,700 Reputation points Independent Advisor
    2026-10-23T15:03:33.4533333+00:00

    Hello Hakim,

    SYSVOL replication hiccups can definitely feel like a headache, but we can knock this out quickly by checking your DFSR event logs for Error ID 2213, which usually means the database dropped unexpectedly. You can easily jump-start it right back to life by running the Resume-DfsrReplication PowerShell cmdlet on the affected volume path.

    If things are still feeling a bit stubborn, you'll want to perform a non-authoritative restore to get those replication groups talking again. Once everything syncs up nicely, just double-check that the SysvolReady registry key tucked under HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters pops back to a healthy value of 1. Finally, keep an eye out for Event ID 4602 to confirm everything is fully initialized and ready to roll!

    Nhu.

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-10-23T14:29:39.4933333+00:00

    Common causes of SYSVOL replication failure on domain controllers are:

    1. Upstream domain controllers are in a DFS Replication error state, commonly after a dirty shutdown with event ID 2213.
    2. The affected domain controller is stuck in initial synchronization and therefore does not complete inbound SYSVOL replication.
    3. Active Directory replication problems are blocking the configuration data that SYSVOL replication depends on.
    4. Name resolution problems between domain controllers prevent partners from resolving each other by fully qualified domain name.
    5. Missing rights such as Access this computer from network for the Enterprise Domain Controllers group can cause replication to fail with access denied behavior.
    6. The domain controller may not be correctly present in the SYSVOL replica set or may be missing the subscriber object.
    7. Replication may be paused by content freshness protection.
    8. Insufficient disk space on the drive hosting SYSVOL or the staging folder can block replication.

    A practical troubleshooting path is:

    1. Check DFSR state on all domain controllers:
         For /f %i IN ('dsquery server -o rdn') do @echo %i && @wmic /node:"%i" /namespace:\\root\microsoftdfs path dfsrreplicatedfolderinfo WHERE replicatedfoldername='SYSVOL share' get replicationgroupname,replicatedfoldername,state
      
      State 4 means normal. State 5 means in error.
    2. Review the DFS Replication event log on any domain controller not reporting state 4, especially for warnings or errors such as event ID 2213.
    3. Check whether content freshness protection is stopping replication:
         wmic.exe /node:%computername% /namespace:\\root\microsoftdfs path DfsrMachineConfig get MaxOfflineTimeInDays
      
      60 means enabled, 0 means disabled.
    4. Verify Active Directory replication health between domain controllers:
         REPADMIN /SHOWREPS %UPSTREAMCOMPUTER%
         REPADMIN /SHOWREPS %DOWNSTREAMCOMPUTER%
      
    5. Verify DNS/name resolution between all domain controllers by pinging each partner’s fully qualified domain name and confirming the returned IP matches IPCONFIG on that server.
    6. Confirm each domain controller is part of the SYSVOL replica set and has a subscriber object:
         NTFRSUTL DS [COMPUTERNAME]
      
      Check for the SET: DOMAIN SYSTEMVOLUME (SYSVOL SHARE) section.
    7. Confirm the domain controllers have enough free disk space on the SYSVOL and staging volume.

    If the issue is DFSR-based missing SYSVOL/Netlogon shares because upstream partners are unhealthy, the documented recovery path is:

    1. Back up all SYSVOL contents first. This is important because mismatched data can be moved into PreExisting or Conflict and Deleted during recovery.
    2. Set affected domain controllers as nonauthoritative by disabling membership, following the procedure referenced in the DFSR recovery guidance. Event ID 4144 confirms membership is disabled.
    3. Force Active Directory replication if needed, then run:
         dfsrdiag pollad
      
    4. Re-enable membership and wait for event IDs 4614 and 4604, which indicate initial synchronization completed.
    5. Restore any required files from backup, PreExisting, or Conflict and Deleted if necessary.

    If content freshness protection is not the trigger and there are three or more domain controllers, the documented action is to run the ResumeReplication WMI method on the affected domain controllers, then confirm DFS Replication logs events 2212, 2218, and 2214.

    If SYSVOL is not shared because DFSR migration or replication is failing with Event IDs 8028 or 6016, determine which Group Policy applies Manage Auditing and Security Log, add Administrators to that policy, run GPUPDATE /FORCE, restart the DFSR service on the affected DC if required, and then validate that SYSVOL and NETLOGON are shared and inbound SYSVOL replication works.


    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.