On Windows 11, the Bluetooth troubleshooter is designed to run through Get Help, so there is no separately documented legacy troubleshooter to bypass it; for the repeated connect-and-disconnect symptom, install the Windows 11 Bluetooth driver supplied specifically for your PC model.
Install the correct Bluetooth driver
A device that pairs, briefly reports “Connected,” and then disconnects can involve a Bluetooth driver or device-level communication problem. A closely matching Windows 11 case involving repeated disconnections was resolved by using the Bluetooth/Wireless driver from the PC or motherboard manufacturer rather than relying on a generic Windows driver.^1^
- Identify the exact laptop, desktop, or motherboard model:
- Press Windows key + R.
- Enter
msinfo32 and press Enter.
- Note System Manufacturer and System Model.
- Open the manufacturer’s official support site and search for that exact model.
- Download its latest Bluetooth or combined Wireless/Bluetooth driver listed for Windows 11.
- Close running applications and install the driver.
- Restart the PC.
- Put the Bluetooth accessory into pairing mode and test it again.
Microsoft notes that Device Manager may report that the best driver is installed even when the PC manufacturer has a newer model-specific version.^2^
About running the troubleshooter without Get Help
The supported Windows 11 route is:
Settings → System → Troubleshoot → Other troubleshooters → Bluetooth → Run
However, that command launches the automated Bluetooth troubleshooter in Get Help by design.^3^ If Get Help opens without performing diagnostics, skip it and use the manual driver steps above; repeatedly launching it through Settings will still use Get Help.
If the manufacturer driver does not fix it
Since removing and pairing the device again has already produced the same result, do not repeat that step. Continue with these alternatives:
- If the problem began immediately after a driver or Windows update, roll back the driver:
- Open Device Manager.
- Expand Bluetooth.
- Right-click the Bluetooth adapter—not the headphones, mouse, or other accessory.
- Select Properties → Driver → Roll Back Driver.
- Complete the prompts and restart.
This option applies only when Roll Back Driver is available.^2^
- Otherwise, reinstall the Bluetooth adapter:
- Open Device Manager → Bluetooth.
- Right-click the Bluetooth adapter and select Uninstall device → Uninstall.
- Restart the PC; Windows should reinstall the adapter automatically.
- If it does not, open Device Manager and select Action → Scan for hardware changes.^3^
- Rule out accessory and radio issues:
- Fully charge the Bluetooth accessory; low battery can prevent it from maintaining a connection.
- Keep it close to the PC while testing.
- Move unshielded USB devices away from USB 3.0 ports near the Bluetooth adapter because they can interfere with Bluetooth communication.^4^
If several unrelated Bluetooth devices all disconnect in the same way after installing the correct driver, contact the PC manufacturer with the exact model and Bluetooth adapter name. That pattern points the next investigation toward the PC’s adapter, firmware, or model-specific driver rather than one paired accessory.
References
- Bluetooth not working properly on Windows 11 - Microsoft Q&A
- [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/update-bluetooth-drivers-in-windows)
- [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/fix-bluetooth-problems-in-windows)
- [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/troubleshoot-bluetooth-not-connecting-in-windows)