how to run Bluetooth troubleshoot without opening get help, and how to fix my bluetooth

Ashahad Hussain 0 Reputation points
2026-11-17T08:54:35.6366667+00:00

as it is opening get help and not troubleshooting anything. My Bluetooth is connecting for a brief moment which is not connected by the way it only show connected for brief moment and disconnect itself and then it doesnt connect it show cant connect then say your device should be in open all the time unless i remove it and when i pair it, again it is same as before

Windows for home | Windows 11 | Devices and drivers
0 comments No comments

2 answers

Sort by: Most helpful
  1. GsN5034 - IA 79,945 Reputation points Independent Advisor
    2026-11-17T09:34:53.86+00:00

    Hello,

    Microsoft has removed the Support Diagnostic Tool (MSDT) and MSDT Troubleshooters since last year. So, this has now been integrated to the 'Get help' app on your Windows. If the Bluetooth troubleshooter does not resolve the here are the steps you can try:

    1

    Restart the Device Association Service.

    • Click Windows + R, type Services.msc, and click ok.
    • Locate Device Association Service in the list, right-click, and click Stop.
    • Then, start the service again.
    • Make sure the Startup type is set to Automatic.

    2

    Reinstall the Bluetooth Adapters from Device Manager.

    • Disconnect/remove your paired device from the Bluetooth devices list.
    • Then go to Device Manager and expand the Bluetooth section.
    • Right-click your generic Bluetooth driver, such as Realtek (R) or Intel Bluetooth driver, select Uninstall device > select the 'Attempt to remove the driver software for this device' checkbox, and click Uninstall.
    • Once uninstalled, restart your computer and pair your Bluetooth device.

    After reinstalling the drivers, see whether it works without any interruption. Let me know how it goes.

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-17T08:55:27.1866667+00:00

    On Windows 11, the Bluetooth troubleshooter is designed to run through Get Help, so there is no separately documented legacy troubleshooter to bypass it; for the repeated connect-and-disconnect symptom, install the Windows 11 Bluetooth driver supplied specifically for your PC model.

    Install the correct Bluetooth driver

    A device that pairs, briefly reports “Connected,” and then disconnects can involve a Bluetooth driver or device-level communication problem. A closely matching Windows 11 case involving repeated disconnections was resolved by using the Bluetooth/Wireless driver from the PC or motherboard manufacturer rather than relying on a generic Windows driver.^1^

    1. Identify the exact laptop, desktop, or motherboard model:
      • Press Windows key + R.
      • Enter msinfo32 and press Enter.
      • Note System Manufacturer and System Model.
    2. Open the manufacturer’s official support site and search for that exact model.
    3. Download its latest Bluetooth or combined Wireless/Bluetooth driver listed for Windows 11.
    4. Close running applications and install the driver.
    5. Restart the PC.
    6. Put the Bluetooth accessory into pairing mode and test it again.

    Microsoft notes that Device Manager may report that the best driver is installed even when the PC manufacturer has a newer model-specific version.^2^

    About running the troubleshooter without Get Help

    The supported Windows 11 route is:

    Settings → System → Troubleshoot → Other troubleshooters → Bluetooth → Run

    However, that command launches the automated Bluetooth troubleshooter in Get Help by design.^3^ If Get Help opens without performing diagnostics, skip it and use the manual driver steps above; repeatedly launching it through Settings will still use Get Help.

    If the manufacturer driver does not fix it

    Since removing and pairing the device again has already produced the same result, do not repeat that step. Continue with these alternatives:

    1. If the problem began immediately after a driver or Windows update, roll back the driver:
      • Open Device Manager.
      • Expand Bluetooth.
      • Right-click the Bluetooth adapter—not the headphones, mouse, or other accessory.
      • Select Properties → Driver → Roll Back Driver.
      • Complete the prompts and restart.
      This option applies only when Roll Back Driver is available.^2^
    2. Otherwise, reinstall the Bluetooth adapter:
      • Open Device Manager → Bluetooth.
      • Right-click the Bluetooth adapter and select Uninstall device → Uninstall.
      • Restart the PC; Windows should reinstall the adapter automatically.
      • If it does not, open Device Manager and select Action → Scan for hardware changes.^3^
    3. Rule out accessory and radio issues:
      • Fully charge the Bluetooth accessory; low battery can prevent it from maintaining a connection.
      • Keep it close to the PC while testing.
      • Move unshielded USB devices away from USB 3.0 ports near the Bluetooth adapter because they can interfere with Bluetooth communication.^4^

    If several unrelated Bluetooth devices all disconnect in the same way after installing the correct driver, contact the PC manufacturer with the exact model and Bluetooth adapter name. That pattern points the next investigation toward the PC’s adapter, firmware, or model-specific driver rather than one paired accessory.


    References

    1. Bluetooth not working properly on Windows 11 - Microsoft Q&A
    2. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/update-bluetooth-drivers-in-windows)
    3. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/fix-bluetooth-problems-in-windows)
    4. [Windows 11](https://support.microsoft.com/windows/hardware/bluetooth/troubleshoot-bluetooth-not-connecting-in-windows)
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.