I spilled water on my laptop, and got it completely repaired from a technician and it works flawlessly now, he may have either performed a factory reset or a Windows 11 re-install. There has been no sound coming from the laptop, no devices audio installed

Shreya Shankarpure 0 Reputation points
2026-11-16T14:59:19.6333333+00:00

I spilled water on my laptop, and got it completely repaired from a technician and it works flawlessly now, he may have either performed a factory reset or a Windows 11 re-install. It has been working nicely and smoothly but there has been no sound coming from the laptop even though i have installed all the relevant drivers and updated them. It still shows no output devices installed but I don't even to connect it to output devices, I just want the sound from the laptops internal speakers.

Windows for home | Windows 11 | Recovery and backup
0 comments No comments

2 answers

Sort by: Most helpful
  1. Ferdinand Nanalig 34,120 Reputation points Independent Advisor
    2026-11-16T15:34:50.1933333+00:00

    Hi, let me help you.

    Have you tried a hard reset?

    Shut the laptop down completely, then unplug the charger and everything else attached (USB devices, external monitors, dongles). Press and hold the power button for 15 to 30 seconds, then let go. This drains the residual power from the motherboard, which does the same job as pulling a removable battery. Leave it for a minute or so, then plug the charger back in and power on.

    Was this answer helpful?

    0 comments No comments

  2. AI answer

    2026-11-16T15:00:07.0266667+00:00

    Open Device Manager and force Windows to detect the internal audio hardware; if it remains completely absent after the scan, return the laptop to the technician for a firmware and physical-connection check rather than installing more drivers.

    1. Determine whether Windows detects the audio hardware

    1. Right-click Start → Device Manager.
    2. Select View → Show hidden devices.
    3. Expand:
      • Sound, video and game controllers
      • Audio inputs and outputs
      • System devices
      • Other devices
    4. Select Action → Scan for hardware changes.
    5. Look for:
      • The manufacturer’s audio device, commonly labelled Realtek, Conexant, or similar.
      • An audio controller such as Intel Smart Sound Technology.
      • An Unknown device or an entry with a yellow warning symbol.

    Microsoft specifically recommends showing hidden devices and scanning for hardware changes when no output device is detected.^1^

    2. Follow the result that matches

    If the audio device appears but is disabled

    Right-click it and select Enable device, then restart Windows. After restarting, open Settings → System → Sound and check whether Speakers appears under Output.^1^

    If the device appears with an error

    Because updating drivers has already made no difference, reinstall the detected device instead:

    1. Right-click the audio device → Uninstall device.
    2. If offered, select Attempt to remove the driver for this device.
    3. Select Uninstall.
    4. Choose Start → Power → Restart, not Shut down.
    5. Windows should attempt to reinstall the device after restarting.^2^

    If Windows does not reinstall it correctly, obtain the audio and chipset packages for the laptop’s exact model from its manufacturer. Do not use a generic Realtek package intended for a different model. A post-reinstallation case with the same “no internal devices detected” symptom recommends the model-specific OEM audio and chipset drivers rather than generic packages.^3^

    If no audio device or unknown controller appears anywhere

    At that point Windows has no hardware endpoint to which it can attach an audio driver. Check the following with the technician:

    1. Enter the laptop’s BIOS/UEFI setup during startup.
    2. If the firmware contains an option named Onboard Audio, HD Audio, or similar, verify that it is enabled.
    3. If no such option exists, do not change unrelated firmware settings.
    4. Ask the technician to inspect the internal speaker cable, audio board/controller, and any liquid-damaged motherboard circuitry.

    A similar clean-install case recommends firmware verification first and hardware service when the internal audio hardware remains undetected.^3^ Given the earlier water exposure and repair, a disconnected or damaged component must be ruled out by physical inspection; another Windows reset is unlikely to help while the controller itself is absent from Device Manager.

    Optional Windows diagnostic

    If Device Manager detects the controller but Speakers still does not appear, run Start → Settings → System → Troubleshoot → Other troubleshooters → Audio → Run. Windows 11 also provides the automated audio troubleshooter through the Get Help app.^2^

    When returning to the technician, provide a screenshot of Device Manager with the four sections above expanded. That distinguishes a Windows configuration problem from hardware that is not being enumerated.


    References

    1. [Windows 11](https://support.microsoft.com/windows/hardware/audio/fix-missing-or-undetected-audio-output-device-in-windows)
    2. [Windows 11](https://support.microsoft.com/windows/hardware/audio/fix-sound-or-audio-problems-in-windows#general-audio-troubleshooting-in-windows-11)
    3. Laptop in-built microphone and speakers do not work - Microsoft Q&A
    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.