Welcome Serge Fleury,
Thanks for reaching out to Microsoft Q&A Forum. I understand that the Windows 11 23H2 to 24H2 update fails, and that Device Manager shows two Périphérique inconnu entries under Autres périphériques that you want to remove.
To narrow this down, could you please share:
- The brand and model of your PC (or motherboard if it is a custom-built PC)?
- The exact error code or message shown in Windows Update when the 24H2 update fails?
Please make sure you already tried the Q&A Assist steps. In addition, please try the following:
1, Identify what the unknown devices are
- In Device Manager, right-click one Périphérique inconnu and select Properties.
- Open the Détails tab and, in the Property list, select Hardware Ids (ID du matériel).
- Copy the first value and search for it on the Microsoft Update Catalog (catalog.update.microsoft.com) or with your PC manufacturer. Repeat for the second device.
2, Install the missing manufacturer drivers
- Go to your PC manufacturer's support page and enter your exact model.
- Download and install the chipset, Intel Management Engine or AMD platform, Serial IO, and system or firmware drivers.
- Restart the PC. Unknown devices are often missing drivers rather than invalid ones, and installing the right driver usually clears them.
3, Check optional driver updates
- Open Settings > Windows Update > Advanced options > Optional updates.
- Expand Driver updates, tick any available drivers, and select Download and install.
4, Find the actual cause of the 24H2 failure
- Unknown devices alone do not usually block the upgrade, so the real blocker may be elsewhere.
- Open Settings > Windows Update > Update history and note the error code of the failed 24H2 update.
- After a failed attempt, open C:$WINDOWS.~BT\Sources\Panther and review setuperr.log and setupact.log. Look for lines with Error or a driver .inf name, and share them here if you can.
5, Repair system files
- Open Command Prompt as administrator.
- Run
DISM /Online /Cleanup-Image /RestoreHealth, wait until it finishes, then runsfc /scannow. - Restart the PC and try the update again.
Looking forward to your update.