inaccessible boot device loop, also not starting from USB, no prompt or whatever

Dini Bouwhuis 40 Reputation points
2026-09-28T15:20:14.0433333+00:00

After reinstallation Windows 11 the laptop runs in a loop with the above message. I cannot reached, a prompt or menu or the repair menu (after on/of 3 times) The loop cannot be stopped and it repeats time after time. F8 works but I cannot use any key to make a change in the boot menu, it shuts off .

I'm trying already a lot of hours to get it solved and I didn't find a solution for this unbreakable loop. I'm very nervous now as it is the laptop of a friend and not mine. Hope you can help, Dini

Windows for home | Windows 11 | Recovery and backup
Answer accepted by question author
David-M 127.3K Reputation points Independent Advisor
2026-10-02T16:25:27.3266667+00:00

That's good news.

To answer your question first: Yes, you can safely remove the USB drive now. All the installation files have already been copied to the internal drive, so unplugging it will not interrupt the setup.

To get past the network screen right now without downloading drivers yet, you can bypass the internet requirement:

  1. On the network setup screen, press "Shift + F10" (or "Fn + Shift + F10") to open a black Command Prompt window; (I hope the shortcut works. If it doesn't, let me know)
  2. Type OOBE\BYPASSNRO and press Enter;
  3. The laptop will automatically restart and return to the setup screen;
  4. This time, when you reach the network screen, you will see a new option: "I don't have internet". Click it, then choose "Continue with limited setup".

This allows you to create your local user account and reach the Windows Desktop immediately.

(Let me know if you spot any discrepancies. Microsoft recently updated the ISO, and I haven't had the chance to perform a clean install to see if anything has changed.)

Once you are on the Desktop:

You can plug your USB drive into another PC, download the Wi-Fi driver (The "Wireless LAN Driver(AX201)" or "Wireless LAN Driver(MT7920)" driver listed on Acer's page), copy it to the USB, plug it into the laptop, and run the setup file to get Wi-Fi working.

Please let me know how it goes.

Feel free to ask any questions you may have.

Was this answer helpful?

2 people found this answer helpful.
Answer accepted by question author
David-M 127.3K Reputation points Independent Advisor
2026-09-28T15:58:04.5133333+00:00

Hi. I'm David, and I'm happy to help you.

To be able to assist you better, please clarify the following:

  • How was Windows reinstalled? Did you use the built-in "Reset this PC" option inside Windows, or did you do a clean install from a USB flash drive?
  • If it was a clean install, how was the boot USB created? Did you use Microsoft's official Media Creation Tool or a third-party tool?
  • Is there data stored on the internal drive that needs to be preserved?
  • What is the exact manufacturer and model of the laptop?

Looking forward to your reply.

Was this answer helpful?

1 person found this answer helpful.

6 additional answers

Sort by: Newest
Most helpful Newest Oldest
  1. Dini Bouwhuis 40 Reputation points
    2026-10-02T16:13:43.46+00:00

    Very very helpfull. It’s going well, but the system is now asking for a network adapter driver. The Acer website lists four options; I think I need to install the first one. However, that file also needs to be on a USB drive, and the one I have is currently being used for the setup. Can I remove this USB drive? Or will that interrupt the entire installation?

    Was this answer helpful?

    0 comments
  2. David-M 127.3K Reputation points Independent Advisor
    2026-09-30T12:26:47.43+00:00

    Thanks for the update.

    Regarding the BIOS and the storage settings, you don't need to worry about that anymore. The photo of the error message shows "Drive 0", which confirms that the laptop's internal drive is already properly recognized by the system.

    Reaching this error screen is a good sign. The "MBR partition label" error means the internal drive currently has an older MBR partition layout, while Windows 11 requires GPT. You don't need to recreate the USB or buy a bigger one. This can be fixed directly on that setup screen.

    Here is how to resolve it with your current USB drive when you get back home:

    1 = Delete existing partitions (This is the easiest method):

    • On the screen asking where to install Windows, click on each partition listed for Drive 0 and click "Delete";
    • Keep deleting until only "Drive 0 Unallocated Space" remains;
    • Select "Drive 0 Unallocated Space" and click "Next". Windows will automatically convert the drive to GPT and start installing.

    2 = Alternative via Command Prompt (If the Delete option is greyed out):

    • On that same installer screen, press "Shift + F10" (or "Fn + Shift + F10") to open the Command Prompt window;
    • Type diskpart and press Enter;
    • Type list disk and press Enter;
    • Type select disk 0 and press Enter; (make sure Disk 0 is the internal drive)
    • Type clean and press Enter; (This clears the old MBR layout)
    • Type convert gpt and press Enter;
    • Type exit and press Enter, then close the Command Prompt window;
    • Click "Refresh" on the Windows setup screen, select the unallocated space, and click "Next".

    Please let me know how it goes.

    If you have any questions, don't hesitate to ask.

    Was this answer helpful?

  3. David-M 127.3K Reputation points Independent Advisor
    2026-09-29T12:19:57.94+00:00

    Sorry for the delay in reply. I've been offline.

    Thanks for the photo.

    The good news is that "F12 Boot Menu" is already turned on.

    Here is what to do next based on your screen:

    1 = Disable Fast Boot. Keeping Fast Boot enabled can prevent the laptop from recognizing the USB drive properly sometimes.

    • On that same "Main" tab, click or toggle "Fast Boot" to off.

    2 = The screen appears to be a new graphical layout from Acer. The VMD/Storage option might be located within the Advanced menu, or the notebook simply does not allow VMD to be disabled via the BIOS.

    • Click on the "Advanced" tab on the left menu. Check if "VMD Controller" or "SATA Mode" is listed there. If not, try pressing Ctrl + S while inside the Advanced tab.

    After changing the suggested settings, don't forget to press F10 to save changes and exit. As it restarts, tap F12 repeatedly to open the boot menu and select your USB drive.

    Please let me know how it goes.

    If you have any questions, don't hesitate to ask.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.