web cam full screen

jeremy joyner 0 Reputation points
2026-09-28T07:12:57.3666667+00:00

How do I get my Microsoft webcam to project full screen on my television if my computer is connected to it?

Windows for home | Windows 10 | Devices and drivers
0 comments

2 answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. SD - IA 180.4K Reputation points Independent Advisor
    2026-09-28T08:35:21.4533333+00:00

    Hi,

    As the AI assistant said, it is possible through Miracast, which works if you have WiFi and the TV supports Miracast. Additionally, it mirrors your entire screen.

    Open Command Prompt and run:

    netsh wlan show drivers

    Look for:

    Wireless Display Supported : Yes (Graphics Driver: Yes, Wi-Fi Driver: Yes)
    • Yes → Your PC supports Miracast.
    • No → Miracast is not supported, usually because of the graphics or Wi-Fi driver.

    If yes, simply press Windows key + K and select TV. You may also have to turn on Miracast in the TV.

    I hope this information helps. If you have any more questions, don't hesitate to reach out. Wishing you good luck!

    Was this answer helpful?

    0 comments

  2. AI answer

    2026-09-28T07:13:11.66+00:00

    To show the webcam image full screen on a TV, the supported path in the available guidance is to use the TV as a second display through a Microsoft Wireless Display Adapter, then adjust the display resolution and scaling if the picture does not fill the screen.

    1. Connect the PC to the TV or projector through the Microsoft Wireless Display Adapter.
    2. If the image is not filling the TV correctly, on the PC select Search on the taskbar, enter screen resolution, then select Change resolution of the display.
    3. For Display resolution, select the resolution marked Recommended.
    4. Select Apply.
    5. If parts of the image are still missing or not scaled correctly, open the Microsoft Wireless Display Adapter app.
    6. Select Personalization.
    7. In Fit to Display, drag the slider to the right until everything on the PC display fits correctly on the TV.

    If video is frozen on the TV, disconnect and reconnect the adapter:

    1. Open action center.
    2. Select Connect > the adapter name > Disconnect.
    3. Unplug both ends of the adapter from the display and plug them in again.
    4. Open action center > Connect, then reconnect to the adapter.

    If the TV supports less than 1080p, the PC will default to that lower resolution while connected.

    AI-generated content may be incorrect. Read our transparency notes for more information.

    Was this answer helpful?

Your answer

Answers can be marked as 'Accepted' by the question author and 'Recommended' by moderators, which helps users know the answer solved the author's problem.