en I write a command " DISM /online /cleanup-image /restorehealth " Remains unchanged at 62.3%

Question

en I write a command " DISM /online /cleanup-image /restorehealth " Remains unchanged at 62.3%

ايمن صبري زرع 25

After subscribing to Windows Insider A big problem arose and I tried hard to solve it, but it was never resolved, even though I made every effort to solve it. However, I failed, so I performed a restore windows I have tried all the solutions to this problem, but it has never been resolved. I am writing the same command on another device, but this message never appears. Is it because this device is installed at your place? It is a personal device that works inside the house, so it does not receive much attention, while the other device is located at the company, so it receives attention. Why does this problem always appear on my device? My laptop

0 تعليقات

5 إجابات

إجابتك

Answer 1

ايمن صبري زرع 25

***Good morning, I hope you are well. I thank you from the bottom of my heart for your support and assistance in solving my problem, but the problem remains as it was and has not been solved after the latest Windows update. I don't know what to do, knowing that I downloaded Windows 11 in the format ISO.
***The problem was quickly resolved, but after the latest update, the problem has not been fixed, and I don't know what to do. Please solve the problem. Warm regards to you all. Screenshot 2026-01-12 062811

Screenshot 2026-01-12 064244

Screenshot 2026-01-12 064340

Lucus-V 13,485 نقاط السُمعة فريق عمل موظفين Microsoft الخارجيين المشرف

2026-01-12T21:01:22.44+00:00

Hi ايمن صبري زرع,
I'm sorry to hear that the problem is back.

Based on the screenshots you provided, it's probably that your internet connection might be unstable. DISM with /Online parameter highly depends on internet connection, please make sure it's stable during the task.

May I ask why you need to run that command so frequent?
ايمن صبري زرع 25 نقاط السُمعة

2026-01-13T07:35:20.5866667+00:00

My internet connection is always stable, and if you're asking why I keep running this, it's just to make sure that this version is stable, that there are no problems with it, and that there are no issues with me running it.
Lucus-V 13,485 نقاط السُمعة فريق عمل موظفين Microsoft الخارجيين المشرف

2026-01-14T16:03:55.5566667+00:00

Hi ايمن صبري زرع,
Your connection may be stable with domestic servers but might not be stable with foreign servers, therefore DISM command reports unstable connection. It depends on your LAN connection, also with your internet provider.

And you don't need to run the command so frequent if you don't have any problem while using Windows, it's not necessary.
ايمن صبري زرع 25 نقاط السُمعة

2026-01-16T16:12:08.63+00:00

Thank you very much. I understand the matter well, and I want to clarify that I no longer need to run this matter again. Thank you very much for your prompt support. Warm regards.

Answer 2

Lucus-V 13,485 فريق عمل موظفين Microsoft الخارجيين المشرف

Hi ايمن صبري زرع,
I apologize for a late reply. Your support will continue until we find a solution, or we have a workaround.

I also apologize that I don't fully understand your concern at first. To leave the Windows Insider Program, please visit Microsoft official Leave the Windows Insider Program for more information.

To ensure you get a clean system, I suggest you do a Clean Install after that. It also gets rid of Windows Update error.

Please ensure that you backup any important data, including Documents, Pictures, Videos, and more.

Download Windows Media Creation Tool, please visit Download Windows 11
Then scroll down to Create Windows 11 Installation Media and click Download Now
Please spend some time to take a look at Before you begin using the media creation tool > USB flash drive:  Attach a blank USB flash drive with at least 8GB of space. Any content on the flash drive will be deleted.
Open downloaded file, walk through until you see a screen asking you Choose which media to use, choose USB flash
Select the bootable USB flash drive with at least 8GB of space that you have prepared to use, then select **Next
**Reminder: any content on the USB flash drive will be deleted.
The USB flash drive will now serve as bootable Windows 11 Installation Media. Select Finish
Reboot your system and boot into USB flash drive
Walk through steps to Clean Install your system

I hope the information above is helpful to you.

If you have any questions, please don't hesitate to let me know.

If the answer is helpful, please click "Accept Answer" and kindly upvote it. If you have extra questions about this answer, please click "Comment".

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

ايمن صبري زرع 25 نقاط السُمعة

2025-11-17T11:11:41.3+00:00

Thank you very much for your continued communication to resolve my issue and for always striving to find a solution that suits me. I would like to clarify that I logged in to " System " And pressure on me " Fix problems Windows Update " The version has been updated Windows works well I preferred this step instead of downloading a new version
ايمن صبري زرع 25 نقاط السُمعة

2025-11-17T20:18:50.7633333+00:00

With all my gratitude and appreciation, you have helped me and restored my self-confidence in how to analyze the problem and arrive at the right solution. From the bottom of my heart, I thank you for solving the

problem from all angles.
Lucus-V 13,485 نقاط السُمعة فريق عمل موظفين Microsoft الخارجيين المشرف

2025-11-20T02:50:47.13+00:00

Hi ايمن صبري زرع,
I'm glad to hear that you have resolved your issue.

Thank you so much for your kind words and thoughtful sympathy. We truly appreciate your understanding and encouragement, and we look forward to continuing to serve you with the same care and commitment.
تم الحذف

مُسح هذا التعليق بسبب انتهاك قواعد السلوك الخاصة بنا. تم الإبلاغ عن التعليق يدويًا أو تحديده من خلال الكشف التلقائي قبل اتخاذ الإجراء. يُرجى الرجوع إلى قواعد السلوك الخاصة بنا لمعرفة المزيد من المعلومات.

Answer 3

ايمن صبري زرع 25

Good evening, I hope you are well. I will take your lack of response to mean that you no longer have an answer and that you have given up on finding a solution to my problem. I would like to clarify something important to you: my internet connection is very good, and I have already downloaded the Windows version from your website, which is activated by Microsoft. So why am I not receiving the appropriate response, considering that I am a subscriber? the appropriate response, given that I am a subscriber to " OFFICE 365 " I don't trust you and I don't know what to do. All I want is to get out of the trial version of "Windows Insider"

0 تعليقات

Answer 4

ايمن صبري زرع 25

Thank you very much for providing the answer and support in solving my problem, but after I did everything you asked me to do, the problem remains unsolved. I have done this before. I restored the copy, and when this update came, it never happened, and the problem remained as it was. I wrote about this in RUN " msdt.exe -id WindowsUpdateDiagnostic"He did what was necessary, and I restarted the computer, but to no avail. The problem was not solved.

Lucus-V 13,485 نقاط السُمعة فريق عمل موظفين Microsoft الخارجيين المشرف

2025-11-14T02:26:13.8366667+00:00
Hi ايمن صبري زرع,
Please replace commands above by these

net stop bits net stop wuauserv net stop cryptsvc ren %systemroot%\SoftwareDistribution SoftwareDistribution.251114 ren %systemroot%\system32\catroot2 catroot2.251114 net start bits net start wuauserv net start cryptsvc

All other steps are unchanged.

Thank you for your time.
ايمن صبري زرع 25 نقاط السُمعة

2025-11-14T07:28:41.26+00:00

I did what you told me to do. I replaced the previous commands with these new ones, and then I updated Windows, but it all failed. I want to clarify something important, which is that I made changes to the files "Rgistry"

Answer 5

Please notice that this is Arabic locale, however since you use English in your question, I will respond in English.

Hi ايمن صبري زرع,
Welcome to Microsoft Q&A forum. I'm happy to help. The issue "DISM" command stucks at 62.3% is not really an issue. "DISM" command with "/Online" parameter indicates that "DISM" will use online resources for its task, while the progress 62.3% indicates that DISM is currently downloading resources. This progress highly depends on your internet connection, so please be patient.

There's another option is running an In-place upgrade, it's easier to track how the progress is going.

Try these steps bellow to In-place Upgrade your system:

*Disclaimer: Let’s try performing an in-place install or in-place upgrade which will refresh your Windows files and operating system without removing files or applications. That being said, we always recommend that if you have important data, you should back it up before making large system changes. If you want to back up your data first, please do so. Once you are done backing up, you can follow the steps in the following guides:
How to run In-place upgrade in Windows 11 - Microsoft Community
How to perform an In-place Upgrade with Windows 10 Step-by-Step Guide - Microsoft Community

Download Windows Media Creation Tool
1. If you're on Windows 10, please visit Download Windows 10
2. If you're on Windows 11, please visit Download Windows 11
Then scroll down to Create Windows 10 installation media / Create Windows 11 Installation Media and click Download Now
Open downloaded file, walk through until you see a screen asking you What do you want to do? / Choose which media to use
1. If you're on Windows 10, choose Create installation media > Next > ISO file
2. If you're on Windows 11, choose ISO file
Choose the location you want to save ISO file, then wait for the tool download it
Open ISO file, Windows will create a drive
Open newly created drive, run Setup
Walk through steps to In-place upgrade your system

If you have any further questions, please don't hesitate to let me know by "Comment".

If the answer is helpful, please click "Accept Answer" and kindly upvote it. If you have extra questions about this answer, please click "Comment".

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

ايمن صبري زرع 25 نقاط السُمعة

2025-11-12T04:54:25.46+00:00

Thank you all for your support in solving my problem, but I want to clarify something important, which is that I had already tried these steps before, but they failed and the problem returned as it was, especially after the update {Windows 11 Insider Preview Quality Update (26220.7052)}

And a recent update has come windows {Windows 11 Insider Preview Quality Update (26220.7070)} {However, the update never happens because it does not install and an error message appears.}

Some update files are missing or have problems. We'll try to download the update again later. Error code: (0x80073712)

I don't know what to do about this problem that always keeps me awake at night, and I can't find a solution. The question here is, since the latest updates are unstable, why are they being sent to us?
Lucus-V 13,485 نقاط السُمعة فريق عمل موظفين Microsoft الخارجيين المشرف

2025-11-12T07:18:58.4466667+00:00

Hi ايمن صبري زرع,
For the error code 0x80073712, please try suggestions bellow:

Clean up before repair
Please run StartComponentCleanup before RestoreHealth
DISM /Online /Cleanup-Image /StartComponentCleanup DISM /Online /Cleanup-Image /RestoreHealth

Windows Update Troubleshooter

Open Command Prompt (Run as Administrator) then run these commands
net stop bits net stop wuauserv net stop cryptsvc ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak ren %systemroot%\system32\catroot2 catroot2.bak net start bits net start wuauserv net start cryptsvc

Reboot your computer

Run Windows Troubleshooter by Settings > System > Troubleshoot > Other troubleshooters > Windows Update > Run

If you see that Windows 11 Insider has issues and need a more stable environment, you may choose a stable channel any time.

I hope that above information is helpful to you.